SKU · 12040946

Winterfect III

Wintergreen quat disinfectant concentrate — dilutes 1:64

$39.42 / plastic jug
Fast shippingFrom Alliance, OH
Out of stock
30‑day returns
Net‑30 availableFor verified facilities
Ships from OhioSame‑day before 2pm ET
30‑day returnsEven on opened cases
Made in OhioSince 1938
$
Net‑30 financingFor verified facilities

Winterfect III

Winterfect III is a wintergreen-scented quaternary disinfectant-deodorant concentrate engineered for cold-weather facility cleaning. It dilutes 1:64 — one ounce per gallon — to deliver one-step cleaning, disinfection, and deodorization on hard, non-porous surfaces.

What makes it different

  • Cold-stable formulation. Holds together in unheated storerooms, garages, and route trucks through winter without phase separation.
  • Wintergreen masking. Cuts through urine, smoke, and locker-room odors with a clean, neutral finish — not a perfume cover-up.
  • True 1:64 economy. One gallon of concentrate yields 65 gallons of use solution — a working cost of pennies per gallon.
  • One-step process. Cleans and disinfects in a single pass on hard, non-porous surfaces. No pre-cleaning needed for routine soils.

What it isn't for

Not a food-contact sanitizer. Not for soft or porous surfaces (upholstery, raw wood, carpet). For full EPA-listed kill claims and required contact times, refer to the Tech Sheet.

Packaging

One-gallon plastic jugs, packed four per case. Five-gallon pails and 55-gallon drums available on request. Backed by Damon's guarantee and over 70 years of service.

What it isn't

Not a food-contact sanitizer. Not for soft or porous surfaces. Not a degreaser — pre-clean heavily soiled areas first.

Surface compatibility

Tested at label concentration on common facility surfaces. For uncommon substrates, request a compatibility test from your Damon rep.

Sealed hard floorsTile, sealed concrete, vinyl, LVT
Restroom fixturesToilets, urinals, partitions, sinks
!
Food-contact surfacesUse a food-contact sanitizer such as Q-San instead
!
Carpet and soft surfacesDesigned for hard non-porous surfaces only

Surface compatibility

Sealed hard floorsTile, sealed concrete, vinyl, LVT
Restroom fixturesToilets, urinals, partitions, sinks
!
Food-contact surfacesUse a food-contact sanitizer such as Q-San instead
!
Carpet and soft surfacesDesigned for hard non-porous surfaces only

Application directions

Step-by-step instructions. Read all steps and any caution-flagged steps in full before starting.

  1. 1

    Pre-clean visibly soiled surfaces

    Remove gross soil, food debris, and standing dirt from the surface before disinfection.

  2. 2

    Dilute 1:64

    Mix 2 oz of Winterfect III per gallon of water (1:64). Use cool or room-temperature water.

  3. 3

    Apply and keep wet

    Apply by spray, mop, sponge, or cloth. Keep surface visibly wet for the contact time listed on the Tech Sheet.

  4. 4

    Air dry

    Allow to air dry. No rinse required on non-food-contact surfaces.