Home/ Catalog/Glass 'n' More
SKU · 03140744

Glass 'n' More

Ammonia-free glass + Plexiglas cleaner, RTU

$28.89 / plastic jug
Fast shippingFrom Alliance, OH
Available · ships today
30‑day returns
Net‑30 availableFor verified facilities
Ships from OhioSame‑day before 2pm ET
30‑day returnsEven on opened cases
Made in OhioSince 1938
$
Net‑30 financingFor verified facilities

Glass 'n' More

Glass 'n' More is a ready-to-use, ammonia-free, multi-surface glass and Plexiglas cleaner. Cuts smoke film, fingerprints, and light grease on windows, mirrors, polycarbonate, and other clear materials without the streaks, haze, or odor of ammonia.

What makes it different

  • Ammonia-free. Safe on acrylic, polycarbonate, and Plexiglas where ammonia causes crazing and yellowing.
  • Streak-free finish. Built to flash off cleanly without leaving rainbowing or residue under fluorescent or daylight viewing.
  • Multi-surface. Works on glass, mirrors, stainless trim, chrome, and laminate — one bottle for the whole front-of-house.
  • Low-odor for occupied spaces. Offices, classrooms, healthcare — no ammonia smell to drive people out of the room.

What it isn't for

Not a degreaser for heavy oils or shop soils. Not formulated for tinted or coated automotive windows without spot-testing first. Not a disinfectant.

Packaging

One-gallon plastic jugs, packed four per case. Use neat from a trigger sprayer or refillable bottle. Backed by Damon's guarantee.

What it isn't

Not a heavy degreaser. Not formulated for tinted or coated automotive glass without spot-testing. Not a disinfectant.

Surface compatibility

Tested at label concentration on common facility surfaces. For uncommon substrates, request a compatibility test from your Damon rep.

Glass and mirrorsPrimary use — streak-free
Plexiglas, acrylic, polycarbonateAmmonia-free — will not craze or yellow
Stainless steel, chrome, laminateCleans fingerprints and water spots
!
Tinted automotive windowsSpot-test on coated or tinted glass before broad use

Surface compatibility

Glass and mirrorsPrimary use — streak-free
Plexiglas, acrylic, polycarbonateAmmonia-free — will not craze or yellow
Stainless steel, chrome, laminateCleans fingerprints and water spots
!
Tinted automotive windowsSpot-test on coated or tinted glass before broad use

Application directions

Step-by-step instructions. Read all steps and any caution-flagged steps in full before starting.

  1. 1

    Transfer to a spray bottle

    Decant into a clean trigger sprayer or refillable bottle. No dilution — ready to use.

  2. 2

    Spray onto cloth, not the surface

    On framed or trimmed glass, spray onto a microfiber to avoid runs into seals and frames.

  3. 3

    Wipe with even strokes

    Wipe in one direction with a clean, lint-free cloth or microfiber. Flip the cloth as it loads up.

  4. 4

    Polish with a dry cloth

    Buff with a second dry microfiber for a streak-free finish, especially on large mirrors and storefront glass.

Documentation

Audit‑ready PDFs. Use these for Joint Commission / CMS / OSHA compliance.

SDS
Safety Data Sheet (SDS)

OSHA HazCom · DMN0320

↓ Download PDF